|
DAMPING RINGS
A Series These articles are made of two rings moulded into vulcanized
rubber. Interposed between the bellhousing and the tank cover, they reduced the noise created by the power transmission by approx.
3÷5 dB. The employed rubber is mineral oil resistant, max. working
temperature is 80°C.
Motor diameter Flange: 200÷400 mm. FOOT FLANGES
P Series Manufactured of high resistance alluminium alloy, these flanges are
used to support our bellhousings with standard B5 flange up to an
external diameter of the motor of ∅ 350 mm. From ∅ 400 upwards
these foot flanges are made of steel.
GASKETS
GL Series
Gaskets for bellhousings, made of GUARNITAL.
They are interposed between bellhousing and the oil tank.
|
GASKETS
GP Series
Gaskets for gear pumps, made of GUARNITAL.
They are interposed between bellhousing and the pump.
DAMPING RODS FOR OMT FOOT FLANGES
BMA Series
Made in aluminium alloy, they are made of two bars moulded into vulcanized
rubber; they are used either between OMT foot
flange and oiltank cover or between the motor and the
ground where vibrations are higher. They can work up to
+ 80°C degrees and reduce the
noise created by the power transmission by approx.
3÷5 Db.
|
|
